Aastra 6730a Operation Guide Di tdocumentwor dtuaangebodendoorT el ecomHunt er .Déz akel i j keT el ecom webs hop. T0887463444 | @ s al es @T el ecomHunt er . nl| www. T el ecomHunt er .
Table of Contents Introduction ..................................................................................................................................... 3 Phone Specification ........................................................................................................................ 3 Phone Parts .................................................................................................................................... 4 Key Panel..............................................
Introduction Aastra 6730a is an advanced line-powered analog phone. It supports multi-languages, call log management, volume adjustment, message waiting, configuration lock, and remote control through FSK singnalling.
Phone Parts When you unpack your phone, you should ensure that you have all of the following items. If any part is missing, contact the supplier of your phone. Di tdocumentwor dtuaangebodendoorT el ecomHunt er .Déz akel i j keT el ecom webs hop. T0887463444 | @ s al es @T el ecomHunt er . nl| www. T el ecomHunt er .
Key Panel Di tdocumentwor dtuaangebodendoorT el ecomHunt er .Déz akel i j keT el ecom webs hop. T0887463444 | @ s al es @T el ecomHunt er . nl| www. T el ecomHunt er .
Symbols / Keys Français Español Deutsch Português Nederlands Italiano Speed-dial Numérotation Teclas Kurzwahl Marcação rápida Snel-kiezen Numeri brevi Shift / M0-M7 abrégée programables Shift / M0-M7 Shift / M0-M7 Shift / M0-M7 Shift / M0-M7 Shift / M0-M7 Shift / M0-M7 Touches de Teclas de Navigationstasten Teclas de Navigatie toets Tasti di Navigation keys navigation navegación Flash key R - Flash Tecla Flash R-Taste Redial / Pause key Touche Bis / Rellamada / Wahlwie
Bottom View Symbols / Keys Line socket Français Español Prise de ligne Puerto téléphonique conneccion de Deutsch Anschlussbuchse Português Nederlands Italiano Conector de linha Lijnpoort Presa linea telefónica telefonica linea OFF / Hi Volt / Off / Haute DE / Alto AUS/Spannung/ OFF / Hi Volt / UIT / Hi Volt / OFF / Alta MW(-) / MW(+) Tension / voltaje / MW(-) MW(-) / MW(+) MW(-) / MW(+) MW(-) / MW(+) Tensione / MW(-) / MW(+) / MW(+) Prise casque Puerto de Headset Jack MW(-
Basic Operation Dial and Pre-dial Dial Pick up the handset (or press [ [#] or [Pause] to dial out. ] for handsfree / headset operation) and press numeric key, [*], Pre-dial During on-hook, press numeric key, [*], [#] or [Pause] for the number to be dialed (max. 32 digits). Press [ ] or [ ] key or pick up the handset, the phone will dial out the number. Call by Handsfree 1. Press [ ] and enter the number by using the dial pad. 2. To hang up the phone, press [ ] again. 3.
Menu Operation - Press [ - Press [ ] or [ ] to scroll up and down for different options. - Press[ - Pressing [ Main menu ] to enter into main menu. ] or [ ] to enter the submenu / confirm selection.
Phone Setting Set Language 1. Press [ ] > PHONE SETTING > SET LANGUAGE 2. Press [ ] or [ ] to choose the favourite language (English, Français, Español, Deutsch, Português, Nederlands, Italiano) 3. Press [ ] or [ ] to confirm Set Ring Volume 1. Press [ ] > PHONE SETTING > RING VOL 2. Press [ ] or [ ] to adjust the ringer volume (OFF / LOW / HIGH ) 3. Press [ ] or [ ] to confirm Set Ring Melody 1. Press [ ] > PHONE SETTING > RING MELODY 2. Press [ ] or [ ] to choose ring melody (MELODY 1 to 8 ) 3.
Set Handfree Volume 1. Press [ ] > PHONE SETTING > SET HANDFREE VOL or Press [ 2. Press [ ] or [ ] to adjust the volume on handfree loudspeaker. 3. Press [ Handfree Volume Level 8 (Max.) Display Icon Level 7 ▂ ▂ ▄▄▆ ▆ ▆ Level 6 ▂ ▂ ▄▄▆ ▆ Level 5 ▂ ▂ ▄▄▆ Level 4 ▂ ▂ ▄▄ Level 3 ▂ ▂ ▄ Level 2 ▂ ▂ Level 1 (Min.) ▂ ▂ ▂ ▄▄▆ ▆ ▆ ▆ ] or [ ] to confirm Set Headset Volume 1. Plug in the headset 2. Press [ ] 3. Press [ ] or [ ] to adjust the volume on the handset. 4.
Set Lock state 1. Press [ ] > PHONE SETTING > SET LOCK STATE 2. When the display shows “ENTER PASSWORD”, enter the password If the phone was locked: 3. the display shows “UNLOCK?” 4. Press [ ] or [ ] to unlock / Press [ If the phone was unlocked (default): 5. the display shows “LOCK?” 6. Press [ ] or [ ] to lock / Press [ ] or [ ] to quit without change ] or [ ] to quit without change Note: The phone was defaultly unlocked.
Time Format 1. Press [ ] > PHONE SETTING > TIME FORMAT 2. Press [ ] or [ ] to select the time format (12 Hours or 24 Hours) 3. Press [ ] or[ ] to confirm Area code setting 1. Press [ ] > PHONE SETTING > LOCAL AREA CODE 2. Press [ ] or [ ] to set each digit 3. Press [ ] to confirm and move to next digit setting. The area code can be set in maximium 5 digits combination 4. After finishing the setting press [ ] twice or move to the last digit and leave Di tdocumentwor dtuaangebodendoorT el ecomHunt er .
Alarm Setting Alarm clock The alarm clock should be set as 24H, HH/MM and phone should then activate the alarm in 5 sec after the local clock reached the set time in alarm clock 1. Press [ ] > ALARM SETTING > ALARM CLOCK 2. Press [ ] or [ ] to adjust the time 3. Press [ ] or[ ] to confirm Alarm duration The option for selecting the desired alarm interval. 1. Press [ ] key > ALARM SETTING > ALARM INTERVAL 2. Press [ ] or [ ] to select the alarm duration (5 / 10 / 15 / 30 min; default 10 min) 3.
Call Records View Call Records 1. Press [ ] > CALL RECORD 2. Press [ ] or [ ] to select “MISSED CALL” / “DIALED CALL” / “ANSWERED CALL” 3. Press [ ] or [ ] to view the calls list. 4. Press [ ] or [ ] to scroll the list. Hold the [ ] / [ ] key for 3s could activate fast scrolling Delete Call Records 1. 2. 3. 4. To delete a call record, press [ ] When you will see ‘DELETE?’, press [ ] to confirm or [ ] or [ ] to cancel the deletion. If you want to delete ALL the records, press and hold [ ] for 3 seconds.
Speed Dial Memory Save a Memory 1. Place the handset on the phone 2. Press “one-touch” memory key (M1 to M7) or “two-touch” memory keys (Shift + M0 to M7) 3. Press [ ] and enter the name to be saved 4. Press [ ] key again, enter the number to be saved and finish by Press [ ] key to complete saving Dial from a Memory 1. Pick up the handset or press [ ] 2. Press “one-touch” memory key (M1 to M7) or “two-touch” memory keys (Shift + M0 to M7) to be dialed Delete Memory 1. Place the handset on the phone 2.
Message Waiting Memory (MWM) The message waiting memory normally stores the number to reach the voicemail box. Save MWM 1. Place the handset on the phone and press [ 2. Press [ ] and enter the number to be saved 3. Press [ ] key again to complete saving ] Dial from a MWM 1. Pick up the handset or press ‘Speaker/Handset’ 2. Press the [ ] Delete MWM 1. Place the handset on the phone 2. Press [ ] 3.
Phonebook 1. Press [ ], the display shows “SEARCH”. 2. Press [ ] or [ ] to select “SEARCH” or “ADD”. Search Phonebook 1. Select SEARCH and press [ ] key to enter Phonebook viewing state 2. Press [ ] or [ ] to view the records. Hold the [ ] / [ ] key for 3s could activate fast scrolling 3. Lift the handset or press either [ ] or [ ] to dial out. Add Phonebook 1. Select ADD and press [ ] key to enter into Phonebook modification state. 2. Enter the name you wish to record and press [ ] to save. 3.
Caller ID display After receiving a new incoming call, the number will display on LCD and hold for 10s, during this time, if received another new call, it will continue to display for 10s and display corresponding icon. Incoming calls records include the Number, Name, Date/Time, Caller Timer, Repeated call icon, New missed call icon, Missed call icon and Received call icon.
EC‐Declaration of conformity Déclaration de conformité CE EG‐Konformitätserklärung Declaración de conformidad CE AASTRA France (1 rue Arnold Schoenberg – 78280 Guyancourt – France) hereby declares that: This product, Aastra 6730a, is in conformity with the essential requirements and other relevant provisions of the European Directive 1999/5/EC (R&TTE Directive) Le poste Aastra 6730a est conforme aux exigences essentielles de la directive 1999/5/EC Dieses Gerät Aastra 6730a entspricht den grundlegenden Anfor