Installation guide

AASTRA 6700I SIP TERMINALS FOR MX-ONE
76 26/1531-ANF 901 14 Uen E10 2014-01-22
18.3.3 Set Scope Options
The last step is to set the URL string.
Figure 19:Set Scope Options
Select appropriate Vendor class and set the User class to Default User
Class. Activate option 002 and enter the URL of the software server
(configuration server) in the input field String value.
Repeat this for each phone model that should be served by this DHCP
server.
If VLAN identity shall be provided via option 43, repeat this for code 08
and code 09, see table 9 Options that can be set in option 43. on page 72