Installation guide

AASTRA 6700I SIP TERMINALS FOR MX-ONE
6 26/1531-ANF 901 14 Uen E10 2014-01-22
3 Power Equipment
These telephones can be powered from any of the following methods:
• 6730i is powered from an AC adapter 5V. No PoE support.
• 6731i, 6735i, 6737i, 6739i, 6753i, 6755i, 6757i are powered using
PoE according to IEEE 802.3af or from an AC/DC adapter 48 V.
• Power over Ethernet power injector, which supplies 48 V power
through the Ethernet cable on pins 4&5 and 7&8. The power
injector is available as an optional accessory.
Table 2 Power classes for the different phone models
*) Maximum one expansion module with PoE. Up to three modules with
AC/AC adapter.
**) Single call established in handset mode, backlight on. No PC
connected.
Explanation of power classes:
• 0 - classification is not implemented.
• 1 - less than 3.84 W.
• 2 - less than 6.49 W.
Device Power Consumption **) Power Class
6730i 2.4 W not applicable
6731i 2.4 W 1
6735i 2.8 W 2 *) from REV:29
6737i 2.9 W 2 *) from REV:30
6739i 4.8 W 0
6753i 3.3 W 0
6755i 4.0 W 0
6757i 4.1 W 0