Installation guide

AASTRA 6700I SIP TERMINALS FOR MX-ONE
56 26/1531-ANF 901 14 Uen E10 2014-01-22
11.20 Configuring Ring Signals
The adaptation of the ring signals for the market is made from the config-
uration file. The tables below shows values to be set for Europe / Stan-
dard and for North America application systems.
Table 4 Ring signal cadences for Europe / Standard
Table 5 Ring signal cadences for North America
11.21 Configuring Presence Services
These telephones have menu support for activating of absence reasons
(message diversion) under the Diversion key. The menus are pushed
out from the PBX and no settings are required in the configuration file for
the telephone.
When message diversion is active, the lamp at the Diversion key is lit.
Note: It is necessary to set the time and date format in MX-ONE for the
different absence reasons. Use command:
extension_text with parameter ics-time-format
Common answering position(s) must be set as well so the system
has a destination number where to redirect traffic when absence
reason is active. Use command:
CDCOI with parameters
Ring
signal
Parameter in
configuration file Cadence
External bellcore cadence dr2 350, 300, 350, 5000
Call back bellcore cadence dr3 300, 400
Ring
signal
Parameter in
configuration file Cadence
External bellcore cadence dr2 800, 400, 800, 4000
Call back bellcore cadence dr3 400, 200, 400, 200,
800, 4000