Installation guide

26/1531-ANF 901 14 Uen E10 2014-01-22 45
C
ONFIGURING THE PHONE
Figure 11:Configuration Server Settings
5. Restart the phone.
6. Open MP, and click Telephony tab. Add a SW server for your
configuration files.
7. Restart a unit SIPLP, to activate changes, use command restart
-u SIPLP-lim x.
Figure 12: SW Server
8. Specify a IP Phone server and a domain folder, if used.
In MP the default IP Phone Server and Domain Folder has to be
setup to point to the correct configuration file (the same as used by