Installation guide

AASTRA 6700I SIP TERMINALS FOR MX-ONE
44 26/1531-ANF 901 14 Uen E10 2014-01-22
Note: Each Telephony Server holds a copy of the ip_telephony.conf file.
For consistency and simplicity, any change to it should be made
consistently on all telephony servers. Settings apply to all tele-
phones of the same model: In the example above, the
logon/logoff key is disabled for all 6731i telephones, and all keys
are open for programming since the offset value is zero.
2. Restart unit SIPLP, to activate changes. Use command restart -u
SIPLP --lim x.
3. Logon to the web interface of the phone. Unmarke (Disable) the
option DHCP download Options, and save the options.
Figure 10: Network Settings
4. Select the right SW Server.