Installation guide

AASTRA 6700I SIP TERMINALS FOR MX-ONE
38 26/1531-ANF 901 14 Uen E10 2014-01-22
– Speed dial (TNS) key. Can also be programmed from a menu
in the telephone or from the web interface in the phone.
– Personal Number (PEN) key
– Shared Call Appearance (SCA) key
– Extra Directory Number (EDN) key
– Malicious Call Trace (MCT) key
The connection between the soft key number in the phone and the
logical key number when initiating a key in MX-ONE is: The logical
key number 1 corresponds to soft key number 9 in the phone,
logical key 2 to softkey 10, etc.
The first available key number that can be used as an individual key
is defined in the configuration file in MX-ONE:
/etc/opt/eri_sn/ip_telephony.conf
Softkeys of the type none are not shown in the display. For example; if
the softkey with key number 10 is programmed with a speed dial
number, the softkey will show up in the telephone display on the first key
position with type equal to none. If the user want to have the key on the
phone display on the same position as where the key was programmed,
the softkeys must be set to type equal to empty.
The top softkeys are reserved in the following way (only 6737i/57i):
• 1-5, system keys, see 11.13.2 Default key layout on page 39.
• 6-10, individual keys of the type: speeddial, xml, none, empty
speeddialxfer, speeddialconf or phone lock.
Table 3 Number of Shortcut keys
Model
Hard
keys
Soft
keys Comment
6730i/ 31: 8 top -
6739i: - 55
6753i: 6 This model must have an
expansion module if MNS,
TNS (initiated from the PBX)
MCT, PEN shall be used.
6735i/
55i:
6 top 6 bottom 20 bottom softkeys on 4
pages.
6737i/
57i:
- 6 top, 6
bottom
20 bottom softkeys on 4
pages.
10 top softkeys on 2 pages.