Installation guide

26/1531-ANF 901 14 Uen E10 2014-01-22 3
G
ENERAL
1 General
This document is valid for Aastra 6730i, 6731i, 6735i, 6737i, 6739i,
6753i, 6755i and 6757i SIP phones, when installing these telephones in
a MX-ONE environment.
1.1 Scope
This document describes how to install and configure for the Aastra
6700i terminals in a MX-ONE Telephony Server (TSE) environment. For
general installation information that is not unique for a MX-ONE environ-
ment, there is a reference to the Administrator Guide for Aastra Models
6700i and 9000i Series IP SIP Phones.
There is also one platform independent installation guide per telephone
model available on www.aastra.com.
1.2 Glossary
Some expressions in this document follows the expressions used in
MX-ONE, which can differ from the expressions used in the Adminis-
trator Guide for Aastra Models 6700i and 9000i Series IP SIP Phones.
Table 1 Expressions used in MX-ONE and in 6700i documents
MX-ONE
Administrator Guide for Aastra
Models 6700i and 9000i Series IP
SIP Phones
Software server Configuration server
Shortcut keys Programmable keys and Softkeys
TNS (Telephony Name
Selection)
Speed dial
MNS (Monitored extensions) BLF (Busy Lamp Field)
Settings key Options key
Key Panel Unit (KPU) and
Display Panel Unit (DPU)
Expansion Module