Installation guide

AASTRA 6700I SIP TERMINALS FOR MX-ONE
26 26/1531-ANF 901 14 Uen E10 2014-01-22
Web UI
• Log in to the web interface. Click on Operation > Reset > Restart
Phone
8.3 Firmware upgrade
Firmware upgrade can be done in one of the following ways:
• Web UI: Advanced settings > Firmware Update
• The phone will automatically look for firmware update and configu-
ration files during the boot process.
• Define in the configuration file aastra.cfg if and when phones shall
check for new firmware and changed configuration file. Both regis-
tered and not registered terminals will be updated. Example from
the configuration file:
auto resync mode: 3 #Check for new fw and configuration files every day.
auto resync time: 03:00 #The scheduled time
auto resync max delay: 60 #Specifies the maximum time, in minutes, the phone
waits past the scheduled time before starting a resync
.
• MX-ONE command: extension_unregistration.
•MTS: Telephony > IP Phone > Unregistration
8.4 Viewing Software Version
It is possible to display the versions of the software units.
Phone UI
• Select Options > Phone Status > Firmware info.
Web UI
• Select Status > System Information > Firmware information.
MX-ONE
• MX-ONE command: extension_info