Installation guide

26/1531-ANF 901 14 Uen E10 2014-01-22 15
M
ANAGE THE CONFIGURATION FILES IN MANAGER TELEPHONY SYSTEM
6.1 Create a Configuration File
The procedure to create a new configuration file is:
• Log in to MX-ONE Manager Telephony System.
•Go to Telephony > IP Phone > Configuration file. Press Add
new to open the new configuration file.
Make sure that Aastra 67xxi family is selected and enter the data
into the configuration file which is automatically stored under the
correct directory in the IP Phone Software Server when pressing
Apply.
• To force the telephones to fetch the new configuration file there are
a number of cases:
– If the telephones are not started yet: connect the power and
the telephones will fetch the new configuration file.
– If the telephones are already registered to the PBX, select the
Unregistration option to force the telephones to fetch the
new configuration file.
– The telephones will after less than 24 hours automatically
fetch the new configuration file and if necessary download a
new firmware.
– Restart the telephones manually.
6.2 Changing an Existing Configuration File
The existing configuration file can be updated using the MX-ONE
Manager Telephony System.
The following procedure shall be used when the configuration file shall
be changed:
1. Log in to MX-ONE Manager Telephony System and select:
Telephony > IP Phone > Configuration file
2. Take a backup copy of the existing configuration file by pressing the
backup icon.
3. Use the Change icon to view the configuration file. When the adap-
tation of the file is completed, it is automatically stored under the
aastra67xxi directory in the IP Phone Software Server.
4. For the telephones that are already registered to the PBX, select
the Unregistration option to force the telephones to fetch the new