Operation Manual

Telephoning
87
Making an announcement with intercom
Responding to an announcement (announcement without intercom)
If you receive an announcement yourself, you will hear a special information tone.
Announcement and the caller’s name appears on the display.
Responding to an announcement (announcement without intercom)
Your telephone switches to the handsfree mode when it receives the announcement.
You can speak with the caller immediately.
Note
When you have activated announcement protection (see page 123) and/or intercom
protection (see page 124) on your mobile device, announcements to your call
number will not be carried out.
Pre-dialling: Enter the device-ID of the terminal. Your system adminis-
trator can provide you with the device ID.
Press softkey briefly.
/ Use the navigation keys to select the
Intercom menu entry.
Ok Press softkey to confirm. State your announcement.
Press the call key to answer the announcement.
alterna-
tively:
Reject / Press softkey (alternatively: end key) to reject announcement. The
announcement initiator then hears the busy signal.
alterna-
tively:
Press softkey briefly and use the / navigation keys to select:
Accept to answer the announcement,
Reject to reject the announcement.