Operation Manual

Telephoning

Parked Calls

While calling, you can “park” (one or more) callers for some time and meanwhile

conduct other telephone calls or also hang up and carry out other operations. Parked

calls are recorded on a list. You can remove calls from the list in any order such that a

call is specifically “unparked” once again. The caller hears music on hold – if music on

hold has been configured – until the call is “unparked”. If the caller is not “unparked”

after some time, a callback is automatically made to your mobile unit as soon as your

device is free again. The caller is then automatically “unparked”. If you are, however,

still on another call, the caller hears the busy signal and is thus “unparked”. The

authorisation for parking connections and the time interval until which callback takes

place, is configured by the system administrator upon system configuration.

Park call

You are making a call.

Press softkey.

/ Use the navigation keys to select the

Park call

menu entry and

confirm with the

softkey. The system offers the next available

parking spot (0-9, * or #). Confirm with the

softkey.

Press the end key.

Unpark call

Press softkey when idle.

/ Use the navigation keys to select the

Unpark

menu entry and confirm

with the

softkey. Select the parked call desired from the list offered.

Confirm with the

softkey.

You will be connected with the parked caller.