User Guide EN

97
Key programming
Your handset provides the possibility of assigning frequently used functions to specific keys.
Aastra 610d, 612d
You can program the left and middle softkey below the display and the left and right navigation
keys. The left and right programmed navigation key can also be used in the handset’s connection
state (providing their programming differs from the factory setting with the setting Info and Profile).
Aastra 620d/622d/630d/632d/650c
You can program the left and middle softkey below the display. These programmed keys can only be
used in the idle state. The three sidekeys (left), the Hotkey (right) and the left and right navigation
key can be programmed as before. These programmed keys can be used in the handset’s idle state
and state, but only if their programming differs from the factory setting with the setting Info and
Profile.
Once you have programmed the keys, the icon for the programmed function is indicated on the dis-
play (does not apply to the Hotkey). All you need to call up the function is a short keypress.
Note
Please note that some functions can only be displayed in the connected state. For instance if you call
up the call list, you can browse through it and edit it, but you cannot dial a call number directly from
the list.
Programming (general)
Press the respective key and hold it for a moment or use the Menu ❯❯❯ -> Settings -> Key pro-
gramming (see page 82).
The following selection is offered:
If you press the softkey during key programming, you obtain the default key of the factory set-
ting. Press
Ok to accept it.
No function The key is not assigned.
VIP list The key is assigned with a number list (max. 6 entries).
Alarm clock You can program entry to the alarm clock settings.
Appointment You can program entry to the appointment settings.
Profile The selection of profiles is offered.
Key programming