User guide

Aastra - 2735-007 43
Call Mark
The Call Mark feature allows you to report an outside call with poor audio quality by
using a single feature button labeled Mark. This feature is used to identify bad trunk
lines. Pressing the Call Mark button generates an alarm on the system console identifying
the bad trunk.
This feature eliminates the need for you to personally notify technicians of problems
when on an outside call.
Call Park
The Call Park feature allows you to temporarily place a call on hold for a pre-set time
limit. The call can be retrieved on any phone in the system. If the call if not retrieved
within the time limit, the call automatically reverts back to the extension that parked the
call.
Step
Action
Result
Park a Call:
1.
From a connected call:
Press the Call Park key.
 You hear the Park number and
then silence.
 The call is parked and you can
place and receive calls.
To hear the number repeated,
immediately press the Call Park key
again
2.
Write down the Park number.
3.
 Hang up the handset.
Or
 Press the Goodbye key.
Retrieve a Parked Call:
1.
From any phone on the system:
 Lift the handset.
Or
 Press the Speaker key.
Hear dial tone.
2.
Dial the Call Park number.
 No ringing is heard.
 You are immediately connected to
the calling party.