Installation guide

Sylantro Interoperability Features
RN-001029-00, Rev 03, Release 2.1 73
5i Series IP Phone Release Notes
Configuring ACD Expansion Keys Using Configuration Files
(53i, 55i, 57i, and 57i CT)
You use the following parameter to configure ACD support in the configuration
files:
• expmodX keyN type
• expmodX keyN line
Parameter –
expmodX keyN type
Type
(in Web UI)
Aastra Web UI Operation->Expansion Module N
Configuration Files aastra.cfg, <mac>.cfg
Description Defines the key type on the expansion module. Applicable expansion
modules include the 536M and 560M.
To configure an ACD expansion module key, set this parameter to
“acd.”
Format Tex t
Default Value none
Range See IP Phone Administrator’s Guide.
Example expmod1 key1 type: acd
Parameter –
expmodX keyN line
Line
(in Web UI)
Aastra Web UI Operation->Expansion Module N
Configuration Files aastra.cfg, <mac>.cfg
Description This is the line associated with the expansion module key you are
configuring. Applicable expansion modules include the 536M and
560M.
Format Integer
Default Value 1
Range 1 through 9
Example expmod1 key1 line: 1