User`s guide

Installation and first-time operation
98 eud-1281/1.0 – R1.0 – 12.2010
Wall mounting
You can also mount the phone on the wall. To do so, screw the stand rest onto the wall
as a bracket and hook the phone onto the stand rest.
• Fit the screws for securing the stand rest and mount the stand rest (Figure A).
• Connect the handset and phone cord to the phone (Figure B). For the correct con-
nection assignment refer to Chapter "Connect Aastra 5370", page 100 and
"Connect Aastra 5370ip", page 101.
• Insert the phone into the stand rest horizontally (Figure C-1) and slide downwards
(Figure C-2).
• Unscrew the cams for holding the handset (Figures D-1 to D-3).
• Insert the handset.
Notes:
• As there is only a limited amount of space between the sockets on the back of the
phone and the wall on which it is mounted, you need to use a ribbon cable with
a short connector for the cord. Ask your dealer for a list of suppliers for a suitable
ribbon cable (only Aastra 5370ip).
• You can only connect one Aastra M535 and one Aastra M530 (option) if the
phone is wall-mounted.