User`s guide

Personalizing your phone
eud-1281/1.0 – R1.0 – 12.2010 91
You can choose whether you also want a ringing signal in addition to the flashing Line
key when you receive a call on a Line key. You can configure a ringing delay for the
ringing tone.
To answer a call you can choose between answering directly by pressing the Line key,
picking up the handset, and using automatic hands-free operation.
Answering an external call using automatic hands-free operation is not available.
The following audio settings are possible: Ringing, Melody, Speed, Answer.
Note:
A Line key can only be allocated to a configurable key.
<long>
Press the Line key you want and hold it down for a moment.
➔The display shows the Line key and the properties with which you can con-
figure the Line key.
Note:
The Personal key is also treated as a line key.
Line key
Scroll to Line key and press the Select Foxkey.
<Audio settings>
Set the Audio settings:
Scroll to the required audio settings and press the Modify Foxkey. Select the
required setting and confirm with the Ok Foxkey.
➔The setting is stored.
Setting possibilities for ringing:
• Off for no ringing tone, On for instant ringing tone, and ringing tone Del 10s,
Del 20s and Del 30s and confirm Ok with the Foxkey.
• You can listen to each setting using the Test Foxkey.
Answer
Setting the answering mode:
Scroll to Answer and press the Modify Foxkey.
Select the required setting and confirm with the Ok Foxkey.
➔The setting is stored.
Setting possibilities for answering:
Key to answer the call by pressing the line key, Handset to answer by picking up
the handset, and Hands-free to answer automatically with hands-free.
Notes:
•The Handset and Hands-free settings only work when the ringing signal is
activated.
•If you select answer using Handset or Hands-free, you must also specify the
Priority, with 1 being the highest priority, and 8 the lowest.