User`s guide

Personalizing your phone

78 eud-1281/1.0 – R1.0 – 12.2010

Changing the PIN

You want to change the PIN used to lock/unlock your phone (see Chapter "Locking

your phone", page 48 and "Unlocking your phone", page 49).

The digit combination "0000" is set as default. You can select any 2 to 10-digit combi-

nation for your new PIN.

If you have forgotten your PIN, your system administrator can reset it to the default

setting. Depending on the system settings the function may not be available.

Enter the display text for the idle state

You want to change the text displayed by your phone in the idle state.

Note:

Your PIN applies to all your phones.

Press the Menu Foxkey.

Settings

Scroll to Settings and press the Select Foxkey.

General

Scroll to General and press the Select Foxkey.

Scroll to PIN and press the Modify Foxkey.

➔The display shows Old PIN.

Enter the old PIN and confirm with the Ok Foxkey.

➔The display shows New PIN.

Enter the new PIN and confirm with the Ok Foxkey.

➔The display shows Confirm.

Enter the new PIN a second time and confirm with the Ok Foxkey.

➔The new PIN is stored.

Notes:

• For each digit entered, the display shows an "*".

• You can also change the PIN with */# procedure *47 (see "User’s Guide */#

Procedures" on the Aastra document portal: www.aastra.com/docfinder).

☛