User`s guide

Supplementary features
eud-1281/1.0 – R1.0 – 12.2010 61
Activating personal call routing
You wan to specify which of your phone shall ring when you receive a call.
If your system administrator has set up a phone number with several phones for you
as well as the 5 call routings, you can specify which of your phones shall signal a call
by using the personal call routing. Your system administrator can set up up to 5 call
routings. You can only answer a call on phone where the call is signalled. Contact your
system administrator for more information.
You can activate a call routing for all phones. If you have not configured a call routing,
the default setting (all phones are ringing) is used as standard.
This function must be stored under a Foxkey or a function key (see Chapter "Configu-
ring keys", page 86).
Configuring personal call routing:
Configuring function key and selecting function:
Personal call routing: Activating a call routing.
Personal call routing menu:Overview menu.
Renaming personal call routing:
Menu > Settings > General > Personal call routing > Modify.
Activating personal call routing in idle state:
Press the function key for <Call routing>.
➔Personal call routing is activated.
Deactivating personal call routing in idle state:
Press the function key for <Call routing>.
➔Personal call routing is deactivated and the default setting activated.
Or:
You can deactivate the Personal call routing using Menu > Activated features >
Reset.
☛