User`s guide

Supplementary features
eud-1281/1.0 – R1.0 – 12.2010 59
Answering a general bell
Via the general bell, you hear either your personal ringing pattern or the general ring-
ing signal. Calls with the general bell as the destination can be signalled visually or
acoustically via an external piece of supplementary equipment. The call can be
answered on any phone.
Ask your system administrator whether a general bell is set up.
You can answer from any internal phone.
Activating/deactivating a discreet ring
You do not want to be disturbed by your phone ringing. However, you do not want to
switch off your phone.
Discreet ringing is available on your phone as an alternative to the usual ringing. If dis-
creet ring is activated, the phone rings only once.
This function must be stored under a Foxkey or a function key (see Chapter "Configu-
ring keys", page 86).
Menu
Press the Menu Foxkey.
Call features
Scroll to Call features and press the Select Foxkey.
Pick up
Scroll to Pick up and confirm with the Ok Foxkey.
General bell
Scroll to General bell and confirm with the Ok Foxkey.
<Phone number>
Enter your own phone number and confirm with the Ok Foxkey.
➔You are now connected with the person who is trying to reach you.
Note:
You can also answer a general bell using the */# procedure *82 (personal ring-
ing pattern) and *83 (ringing signal).
In the idle state:
Press the function key for <Discreet ring>.
➔Discreet call is activated, is displayed.
☛