Product guide

A5000 R5.4 Product Guide – SIP terminals – Aastra 6700i range
BPS0121AENAA01 Page 29/64
 Multi-key on secondary directory numbers configurable via AM 7450 only
Some more specific functions can be configured on programmable keys via AM 7450:
 General standby (from R5.3 SP1)
 Filtering, (from R5.3 SP1)
 Hunt group activation (from R5.3 SP1)
 Message indicator light, (from R5.3 SP1)
Note:
 In case of Dual Homing, these keys are retained.
 In case of free seating, these keys are retained only if an AM 7450 is installed.
 In this version, URL XML function keys are not managed in Aastra 5000/AM7450. They must
still be managed via the integrated terminal management web interface.
 However, as there is no synchronisation between the integrated web management of the
terminal and Aastra 5000 / AM 7450 management, it is advisable to limit the use of integrated
web administration to administrators only.
Features not supported in R5.4:
 Intrusion, discrete listening
 Call diversion
 Call by name via TWP Browser or display of name from TWP Browser
 Call when receiver is off hook, the function is in the set and may be programmed locally
 Automatic dial closure
 Tone after dialling 0
35.15.2 Some facilities in detail
35.15.2.1 Menus via Aastra 5000 XML interface
As of release R5.2 some features are accessible from the "menu" key of the terminal, thus increasing
ergonomics and ease of use of Aastra 6700i (not available on 6751i).
This key gives access to the following functions:
 Access to call logs (incoming/outgoing/all calls): this is the iPbx call log which is accessible
instead of the terminal call log (except for A6739i).
 Forward programming:
 all forwarding types
 for any flow type or internal / external calls
 to internal or external numbers, voicemail
 notification of forwarding activated.