User guide

Screen and
Softkey Setup
After the phone is plugged in and powered up, lift the
handset. If softkey
‡
labels appear on the screen as
shown next, your phone set up is complete. If this is
the case, skip to the next chapter Screen States and
Softkeys
.
If softkey labels do not appear on screen:
1. Please dial 1-866-732-8791 (toll free for most States
within North America) or 604-629-4976 to program
your phone
2. At the voice prompt press 2 to download program-
ming. You will see the next screen, please wait. (No
more than ten seconds).
Sayson 390/480e P
hones for TeleVantage
5
7. Insert number card
Write your telephone number on the number card, and
place it into the card slot on the telephone, located
under the mouthpiece in the handset cradle. Gently
bend the clear plastic lens into the slot, over the num-
ber card.
Sayson 390/480e P
hones for TeleVantage
4
‡
The softkeys are the 6 buttons on either side of the screen.
The softkey labels are the text that appears beside the buttons