User guide

Adjusting the

Volume

Pressing the volume button adjusts the

receiver, speaker, and ringer volume.

To adjust the ringer volume, leave the handset in the

cradle and press the volume button while

there is no active call. There are 8 settings for the

ringer—the display will temporarily indicate the cur-

rent ringer volume setting.

To adjust the handset /headset volume press the vol-

ume button while you are on a call. The handset will

return to the default volume after you hang up.

To adjust the speaker volume, press the volume button

while the speaker is activated (activate the speaker by

pressing in the model 390 or / in the

480e . The speaker will remain at this volume until it is

adjusted again.

Note: The default handset and headset volume is always set at

medium.

Sayson 390/480e P

hones for TeleVantage

Dataport

Operation

The Sayson 480e phone is equipped with a dataport

located on the right hand side. The data port can be

used to connect another device such as a fax machine

or computer modem to the phone. Plug one end of a

line cord to the phone and the other end to the device

to be connected.

Note: The dataport will only operate when the handset is on

hook (in the phone base cradle).

Sayson 390/480e P

hones for TeleVantage