User guide

Sayson 390/480e P
hones for TeleVantage
15
Screen States & Softkeys
Connected State
The Connected State screen will appear when you are
talking to someone on the phone. This screen is used
for all call handling functions such as Transferring
calls, Parking Calls, Conferencing Calls and Placing
Calls on Hold.
Tip: To see the Connected State immediately when
you are retrieving a call or answering a call at another
extension use the Pickup softkey. If you use the
TeleVantage keycodes—retrieve a parked call (*92) or
call ringing at another extension (*9)1—you will have
to wait for a few seconds for the Connected State to
appear.
Tip: To perform all your call handling functions with-
out having to remember the codes, use the
Transfr,
Hold and Conf softkeys. You can also use the
Flash softkey, but you will need to know the
TeleVantage keycodes.
Idle State 2
To see the Idle State 2 screen, press the More softkey
from the Idle State 1 screen.
CallFwd — Call Forwarding
This button toggles Call Forwarding on and off. When
turning Call Forwarding on, you will be prompted for
your password and destination number.
Greetng - Greeting Menu
This key allows you to change your greeting. You will
be prompted for your password. For more information
on this feature, please review “Chapter 2: Recording
your Voice Title and Voice-mail Greeting” of
Using
TeleVantage.
SendMsg — Send Message
This key allows you to record a message and send it
directly to the voicemail of one or more TeleVantage
users.
Sayson 390/480e P
hones for TeleVantage
14