User guide

letters of the name beginning with last name followed
by the first name and #. Use ‘1’ for Q and Z. The sys-
tem will search until a unique name is found and will
call the extension associated with the name.
LastNum — Last Number Redial
The TeleVantage system saves and redials the last num-
ber dialed.
LastClr — Dial Last Caller
Pressing this button will dial the last person who called
you.
Vmail — Accessing Voicemail
The Vmail button on the Idle State screen will access
your voicemail box. For more information on this fea-
ture, please review the “Voicemail” section of Using
TeleVantage.
Intercom
You can Intercom other Sayson phones on your
TeleVantage phone system.
Note: To configure your TeleVantage system to support
Intercom go to section “Intercom Setup.”
To make an intercom call on your Sayson 390 or
480e phone:
1. Press the Intrcom softkey or dial *15.
2. Enter the extension or workgroup number.
3. Follow the screen/voice prompts.
Sayson 390/480e P
hones for TeleVantage
11
Screen States & Softkeys
AnyRing — System Call Pickup
Pressing this button will answer call ringing at any
other phone in the office. You will be prompted to
enter the extension of the phone that you want to
answer if more than one phone is ringing.
ExtRing — Individual Call Pickup
You will be prompted to enter the extension of the
ringing phone. Press Done and you will be connected
to the call ringing at that extension.
Dial Menu Screen
Press the Dial softkey and then Dial Options.
This screen will allow you to dial by name, last number
redial or last caller.
Note: In any option, after dialing an extension or outside
number, the screen will switch to the connected state.
ByName — Dial by Name
When you press this key, you will be prompted to enter
Sayson 390/480e P
hones for TeleVantage
10