User Guide User guide

Settings
Dialog 4422 IP Office82
Change ring signal for the Line/Hold key
The Line/Hold key is programmed by your system administrator,
however you can change the type of ring signal from your phone.
Change the type of ring signal
Settings Ô Press.
The Function Keys menu or the Programmable Keys menu is
framed.
Press.
Ô Press the Line/Hold key.
The Line/Hold key is shown together with the current type of ring
signal for the key.
ì
Press (+) to change.
ì Press to change between the ring signals.
• Silence.
• Periodic (repetitive) ring signal.
• Delayed periodic ring signal.
• One muted ring signal. Only one ring signal with a low level.
• One muted delayed ring signal.
Note: The Clear key can be used to leave the menu without
saving the changes.
Press to store the framed ring signal.
Press to return to the previous menu,
or
Settings ÕÔ press to return to idle mode.
Line/Hold key
Periodic
Silence
Periodic