User guide

Features and Menus

Handset: After a confirmation query, the mobile unit is reset to the

factory settings. This means that all settings/entries are

deleted, excepting system subscriptions and the PIN.

Telephone Option: This resets the settings in the “Telephone

Option” menu only.

Telephone Book: Only your local phone book is deleted.

Note: When resetting the mobile unit and the telephone options

any saved emergency call number is also deleted.

Security: This menu entry allows you to prevent unauthorised use of your

telephone keypad. To do so, you require a PIN (Personal Identification

Number). The default is “0000” (4 digits of 0 (zero)).

Lock Handset: Confirm with the

softkey, the mobile unit is now locked.

PIN Lock appears on the display. Outgoing calls are no longer

possible. You may still accept incoming calls. The emergency call key

(

R key) programmed with a call number can still be used.

Change PIN: You can change your PIN (4-digit) here. Enter your current

device PIN (default: “0000”) and then the new PIN twice. You require

the PIN for access to the “Security” menu entry described here where

you can lock the telephone keypad.

“Protection” Menu

Call protect.: Switches call signalling for all call numbers of your device On/Off

(exception: VIP calls are still signalled). You can activate call protection for

internal calls only, for external only or for all calls. When call protection is

activated, a caller hears either a ringing tone or a busy signal (the system

administrator configures this when configuring user groups). If there are

multiple trunk keys configured on your telephone, you can switch call

protection on/off for each of these keys. To do so, select the desired key

(e.g. L1: [internal call number]) and then press the

softkey.

Note: Call protection is only in effect on the terminal where it was

activated. If the internal call number of the terminal is available multiple

times (i.e. on other terminals as well), call protection is not automatically

activated on them.

Announc. prot. (announcement protection): Switching the announcement

protection On or switching it Off. When announcement protection is

activated, no announcements can be made to your telephone (please refer

to page 59 also).