User guide

Basic Functions

Menus

Menu Before and During a Call

When the handset is in the idle or call state, state-dependent menus are displayed

when you briefly press the

softkey. Frequently used features are shown

which you can activate.

Examples:

1. Another telephone in your pick-up group rings and you want to accept the call.

Press the

softkey briefly, select Pick-up and confirm your choice with

You will be connected with the caller.

2. Or a subscriber is busy and you want to be called back. When you hear the busy

signal, press the

softkey and confirm Callback with

The state-dependent menus are individually described at the end of the following

chapters.

Menu when Idle

Note

Menu items marked with an * are only displayed if the corresponding user

authorisation has been set for your user group in the OpenCom 100 / Aastra 800

Configurator. Please contact your system administrator if you have any

questions.

When idle, press the

softkey briefly (also possible if you have already

pressed the

A call key) and then dial…

Un Park: Consecutively “unparks” one or more connections which you have

previously parked, for instance to make enquiries or to forward calls (see

also Menu during Conversation starting on page 46).

Pick-up:* You accept the call for another telephone in your pick-up group.

Pick-up select:* You accept a call for any other internal caller. Enter the call

number of the other telephone. If the other telephone is already in the call

state (e.g. an answering machine is making an announcement), you pick up

the call. The subscriber for whom you picked up the call must belong to a

user group for which “Call removal” authorisation is activated, otherwise

“Pick-up select” is not possible.