User guide

Functions

you press the down arrow key with the last menu entry selected, you go to the

first menu entry.

Switching Function

Some functions only offer two settings – ON or OFF. You can tell the function is

active (ON) due to . If the function is deactivated, “-” appears in this display line.

Number or Arrow Key Configuration

In the “Ringer settings> Volume” menu, for example, you can use the number

keypad or the

Farrow keys to set the desired volume (e.g. level 4). After pressing

the

softkey the setting is applied.

Menus Hide Automatically

Menus hide automatically under the following conditions:

■ In the idle or call state when you receive a call.

■ In the call state when you make entries that require calling up a new call-

dependent menu (e.g. the

R key was pressed for an enquiry call).

■ When pressing a softkey that calls up other menus than the one displayed.

■ If you are in a system menu (e.g. communications system phone book) and a

caller tries to reach you, the caller hears the busy tone.

■ Any open menu closes automatically after 60 seconds if you do not make any

further entries. Exception: Playing back a voicebox message which is longer

than 1 minute. Unsaved changes are lost.

Any saved entries made in menus remain saved when you exit the menu.

Type

OK Esc

‘

Repeat

Play once

Volume Settings

OK Esc

‘

Earpiece: 4

]]]]

||||