Installation manual

Page 10 Aarrow Signature Inset 5
Fig 1
Signature 5 stove cross sectional
view, installed into a standard
16” or 18”chair brick
INSTALLATION
Throat forming lintel
Insulating infill
Expansion joint
Thin straw board
or corrugated
cardboard etc.
Non-combustible sealing rope
( See page 12 )
Constructional hearth
Superimposed hearth
Fire back
To BS 1251:1987
Decorative fire surround
( Non-combustible )
The stove should fit into a standard 16” or 18” open fire place without the removal of the
fire-back (chair brick), provided the same complies to BS 1251:1987.
Some minor adjustment may be required to ensure a good fit. The decorative fire surround
should be manufactured from non-combustible materials only.