User's Manual

Manual

Model YKQ03(TX)

1) Profile：

1.1、Input：4.5V(3*AAA battery)

1.2、Receiver is a UL listed product with grounded outlet

1.3、PIR Transmitter will send out a signal after detecting a signal

2) Description ：

2.1、 Plug in the RF receiver to outlet. And then connect the controlled device to the outlet of the

receiver.

2.2、 Install the PIR Transmitter upon the wall. After installing 3XAAA batteries, the Transmitter

flashes 40 seconds. The transmitter detects the human body movement and send out a

signal to Receiver. The receiver will turn on for 10 minutes after receiving the signal (caution:

there is no turn off signal. The receivers turn off automatically after 10 minutes).

YKQ03 PIR Transmitter

98801 RF Receiver

PAGE 1
Manual Model YKQ03(TX) 1) Profile： 1.1、Input：4.5V(3*AAA battery) 1.2、Receiver is a UL listed product with grounded outlet 1.3、PIR Transmitter will send out a signal after detecting a signal 2) Description ： 98801 RF Receiver YKQ03 PIR Transmitter 2.1、 Plug in the RF receiver to outlet. And then connect the controlled device to the outlet of the receiver. 2.2、 Install the PIR Transmitter upon the wall. After installing 3XAAA batteries, the Transmitter flashes 40 seconds.
PAGE 2
FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.