P-BUA-F150-21 Wiring Harness for Backup Alarm 2021-2022 Ford F-150 INSTALLATION MANUAL
Thank you for purchasing the P-BUA-F150-21 TOOLS REQUIRED: Table of Contents Page 3 - Tools Required For Installation 1. 2. 3. 4. WHAT’S INCLUDED: • Vehicle Specific Wire Harness (P-BUA-F150-21) 1. 10mm Nut-setter 2. 8mm Nut-setter 3. Impact Drill 4.
STEP 1: STEP 4: Use an impact drill and 8mm nut-setter to remove the driver side tail lamp Use an impact drill and 10mm nut-setter to install a compatible backup alarm on the underside of the vehicle Note: (2) 10mm TEK screws are provided with the compatible backup alarm STEP 2: Unplug the OEM connector and install the P-BUA-F150-21 harness between the OEM connectors STEP 5: Plug the backup alarm connector into the mating connector on the P-BUA-F150-21 harness. Secure any excess wiring with cable ties.