Instruction Manual

Embedded Box TKS-G21-CV05
Appendix A Programming the Watchdog Timer A-4
AaeonWDTEnable();
}
*******************************************************************************
*******************************************************************************
// Procedure : AaeonWDTEnable
VOID
AaeonWDTEnable (){
WDTEnableDisable(1);
}
// Procedure : AaeonWDTConfig
VOID
AaeonWDTConfig (byte Counter, BOOLEAN Unit){
// Disable WDT counting
WDTEnableDisable(
0);
// Clear Watchdog Timeout Status
WDTClearTimeoutStatus();
// WDT relative parameter setting
WDTParameterSetting(Timer, Unit);
}
VOID
WDTEnableDisable(byte Value){
If (Value == 1)
WDTSetBit(
TimerReg, EnableBit, 1);
else
WDTSetBit(
TimerReg, EnableBit, 0);
}
VOID
WDTParameterSetting(byte Counter, BOOLEAN Unit){
// Watchdog Timer counter setting
WDTWriteByte(
CounterReg, Counter);
// WDT counting unit setting
WDTSetBit(
TimerReg, UnitBit, Unit);
// WDT output mode set to pulse
WDTSetBit(
TimerReg, ModeBit, ModeVal);
// WDT output mode set to active low
WDTSetBit(
TimerReg, PolarityBit, PolarityVal);
// WDT output pulse width is 25ms