Specifications

3. REPAIR SPECIFICATIONS
Item n°. : W1404621 Page 3-2 Version 01.02
d) « PC interface » board (x)
Remove the connectors who are still link at the board.
Unscrew the 4 distance sleeve (x) and remove the board (the board is also
hold back by the connectors J1 and J2)
e) « CPU/VGA - 486/586LCD » (x) board
Remove the connectors who are still link at the board.
Unscrew the 4 distance sleeve (x) and remove the board.
f) Internal screen cover (x)
Remove the 6 screws on the side and remove the covering cap and the
screen.
3.1.2. Disassembly of rear assembly components (x)
a) LEMO plug(x)
Unscrew the counternut from the plug. The plug can be removed.
b) « automatic cutoff » (x) board and associated
plug (x)
Unsolder the 3 CMS capacitors placed in the dotted ring (representation of the
plug) on the board. Unsolder the 6 solder points in the ring and stand up the
tab at the top of the ring. Remove the board.
Unscrew the counternut from the plug. The plug can be removed.