Specifications

1. OPERATION
Item n°. : W1404621 Page 1-8 Version 01.02
1.6. Connection fault
If a communication problem occurs (incorrect cable connection, faulty cable etc.), the following
message is displayed:
MAGSCREEN Version XX.XX
Communication problem
Check communication
Check software versions
The break in communication is also shown by a change in the icons in the status bar of
MAGLIFE C PLUS.
Check the connections between MAGLIFE C PLUS., MAGSCREEN and MAGFILE. As soon
as the connection problem is solved, the curve and data screen display is resumed.
F
Note: If, however, MAGSCREEN is in control before the connection fault
occurs, the transfer procedure must be repeated (see § 4.3. page 12).
This message is also displayed if the versions of the two devices are
not compatible.
1.7. MAGLIFE C PLUS. / MAGSCREEN / MAGFILE status
indication symbols
· MAGLIFE C PLUS. / MAGSCREEN
The connection status is symbolised by an icon displayed in the status bar.
Version
Magscreen
Icon
Battery
message
Field
message
Date Time
The four possible conditions and associated icons are as follows:
. Connection detected - Control by MAGSCREEN.