Owner manual

PC/104 Module PFM-CVS
Chapter 2 Quick Installation Guide 2-13
2.12 PC/104 -5V/-12V Voltage Selection (JP11) Reserved
-12V -5V GND
JP11 Function
1 -12V
2 -5V
3 GND
2.13 Backlight Brightness Control Connector (CN2)
Pin Pin Name Signal Type Signal Level
1 LVDS Voltage select OUT
2 LVDS Backlight control OUT
3 GND GND
4 GND GND
5 LVDS Backlight Enable OUT
Note: LVDS Voltage can be set to +5V or +12V by JP3.