Instruction manual

26 PCM-7890 User Manual
J11
LCD driving voltage select (J11)
You can select the LCD connector CN10 (pin 5 and pin 6) driving
voltage by setting J11. The configurations are as follows:
LCD driving voltage select (J11)
5V 3.3V *
*default
1 2 3
1 2 3
J12
LCD clock signal select (J12)
You can select the LCD control signal by setting J12. The follow-
ing charts show the available option.
LCD clock signal select (J12)
SHF CLK * ASHF CLK
*default
1 2 3
1 2 3