Instruction manual

40 PCM-4896 User Manual
Ethernet LED signal connectors
(LED1)
The PCM-4896 supports three sets of LED connector for external
LED indicators.
Ethernet active signal LED
Flashing Tx or Rx LEDs indicate that the PCM-4896 is transmitting
or receiving data.
Ethernet link signal LED
A continuously lit LED indicates good linkage between the
PCM-4896 and its supporting hub.
Ethernet LED signal connectors (LED1)
Pin Signal
1 Link LED
2 +5V
3 Rx LED
4 +5V
5 Tx LED
6 +5V