Instruction manual
Chapter 2 Installation 19
J8
LCD driving voltage select (J8)
You can select the LCD connector CN7 (pin 5 and pin 6) driving
voltage by setting J8. The configurations are as follows:
LCD driving voltage select (J8)
5V 3.3V *
*default
1 2 3 1 2 3
J9
LCD clock signal select (J9)
You can select the LCD control signal by setting J9. The following
charts show the available option.
LCD clock signal select (J9)
SHF CLK * ASHF CLK
*default
1 2 3
1 2 3