Instruction manual

Chapter 2 Installation 17

Internal buzzer select (J1)

Internal buzzer External speaker

Clear CMOS (J4)

You can use J4 to clear the CMOS data if necessary. To reset the

CMOS data, set J4 to 2-3 closed for just a few seconds, and then

move the jumper back to 1-2 closed.

Clear CMOS (J4)

Protect* Clear CMOS

*default

ATX Soft-Power Switch connector

(J5)

The ATX Soft-Power switch connector is a 2-pin header. Locate

the power switch cable from your system. It is a 2-pin female

connector. Plug this connector to the Soft-Power switch connector

marked J5.

1 2