Specifications

Peripherals (Advanced)

After selecting Peripherals (Advanced) the following dialog box appears:

Figure 14, Peripherrls (Advanced) Setup

The following parameters can be set (Use the TAB keys to jump between items and

select values using the arrow up and down keys):

Feature Controller I/O Base

Select the I/O base for Feature Port access. The Feature Port interface uses two

consecutive addresses, which should not conflict with any other system device. The

new base address will be used after reboot.

n Base address 100h - 7FFh

Silicon Disk State

Onboard silicon disk support. If this option is enabled the option ROM is mapped to

the CPU address space, while no resources are needed if this function is disabled.

n Onboard silicon disk on Enabled

n Onboard silicon disk off Disabled

2.2.8