Specifications

21
The following selections are available in the setup menu:
User Help
This selection displays a screen with help message and instructions on how to use
list boxes and radio buttons.
Load Defaults
Use this option to reset current settings to factory default values.
Time and Date
Use this selection to set time and date.
AT Hard Disk
This selection offers automatic detection and manual drive parameter configuration
of IDE-/AT-Bus hard disk drives connected to the primary (on-board) and second-
ary IDE-Controller. If using the BIOS automatic detection, several drive types may
be available. Extended modes for IDE hard disk with a capacity of more than 528
MB are supported by the BIOS.
Floppy Disk
Select type of floppy disk drives installed.
After pressing the CTRL-ALT-ESC keys, the following menu is displayed:
Figure 6, Setup Menu