Specifications

PCM-4330-Installation

Before installing the PCM-4330 PC/104 board computer please read the follow-

ing notes very carefully. You must adhere to these rules to avoid damaging compo-

nents:

n Before touching the board or any other component, discharge your body by

touching a grounded object such as the metal chassis of the computer.

n Tools used to install the board must be free of static charges.

n Always remove the power cord from the system before installing or removing

components.

n Handle the board carefully, holding it by its edges only.

n Do not touch components on the board, connecting pins, or exposed circuits on

the board.

Hardware Installation

The PCM-4330 is installed in a PC/104 system taking over all functions of a mod-

ern ISA-compatible computer system.

Please observe all notes listed above before installing the module.

If the system does not operate as anticipated after installation, please

refer to Appendix A: Troubleshooting.

2.1