Specifications

118
TFT Color Displays
Display Display Type
Configuration Switches
set to "on"
Max. Contrast
Voltage
NEC NL6448AC30-06 12 Bit Color TFT 6
no contrast voltage
required
NEC NL6448AC30-10 12 Bit Color TFT 6
no contrast voltage
required
NEC NL6448AC32-01 18 Bit Color TFT 5,6
no contrast voltage
required
NEC NL6448AC33-10 12 Bit Color TFT 6
no contrast voltage
required
NEC NL6448AC30-15 12 Bit Color TFT 6
no contrast voltage
required
NEC NL8060AC24-01
special setting:
(800x600)
18 Bit-TFT
6,7
no contrast voltage
required
NEC NL8060AC26-02
special setting:
(800x600)
18 Bit-TFT
6,7
no contrast voltage
required
Hitachi TX26D60VC1CAB 18 Bit Color TFT 5,6
no contrast voltage
required
TFD Color Displays
Display Display Type
Configuration Switches
set to "on"
Max. Contrast
Voltage
FPD LDH102T-10 18 Bit Color TFD 5
no contrast voltage
required
FPD LDH102T-20 18 Bit Color TFD 5
no contrast voltage
required
LCD-Enable-Signal
The LCD-Enable-Signal (Panel Off Signal) is used to control the LC-displays
and can be set to low or high. Use the appropriate jumper to select the polarity of
this signal.
Cabling
The following tables contain pin assignments for a range of standard LC-
displays to the pins of the universal LCD connector on the PCM-4330 board.
If you can not find a suitable display type in one of the tables and the examples
are insufficient to produce a custom cable, please contact your PCM-4330 dealer.