Specifications

113
Display BIOS-Code SW.3 SW.4 SW.5 SW.6 SW.7 SW.8
Mono Dual-Scan Display 8 Bit on on
reserved on on on
Color Dual-Scan Display 16 Bit on on on
Color Dual-Scan Display 16 Bit on on on on
reserved on on on
reserved on on on on
reserved on on on on
reserved on on on on on
reserved on
reserved on on
00
01
02
03
04
05
06
07
08
09
Appendix B: LC-Displays
The following section contains an excerpt of supported LC-displays with
reference tables assigning individual pins of the universal LCD connector on
the PCM-4330 board to signal lines of several LC-displays and indicating
proper configuration switch settings.
Please contact your PCM-4330 dealer if you cannot find your LC-display in
the following lists and ask for the LCD-Connector manual, which contains
constantly updated lists of all supported displays and further configuration details
and notes.
Configuration Switches
A row of configuration switches (DIL-switches) on the PCM-4330 board is
used to select the connected LC-display. The individual keys of the configu-
ration switches are assigned the following function:
SW.1
SW.2
SW.3
SW.4
SW.5
SW.6
SW.7
SW.8
Please refer to figure 4 on page 14 for the location of these switches.
(reserved)
Toggle between CRT and CRT/LCD simultaneous operation
on: CRT only
off: CRT and LCD simultaneously
Panel Technology 0
Panel Technology 1
Display Configuration 0
Display Configuration 1
Display Configuration 2
Display Configuration 3