Installation guide

Appendix B Installing PC/104 Modules B-69
Installing these modules on the PCM-4894 is a quick and simple
operation. The following steps show how to mount the PC/104
modules:
Step1 Remove the PCM-4894 from your system, paying
particular attention to the safety instructions already
mentioned above.
Step2 Make any jumper or link changes required to the CPU
card now. Once the PC/104 module is mounted, you
may have difficulty in accessing these.
Step3 Mount the PC/104 module onto the CPU card. Do this
by pressing the module firmly but carefully onto the
mounting connectors.
Step4 Secure the PC/104 module onto the CPU card using
the four mounting spacers and srews.
PC/104 Module Mounting Diagram
PC/104
Mounting Support
Female Male
PC/104 ModuleMain board