Installation guide

Chapter 2 Installation 31
LCD panel's voltage setting (JP4)
You can select the LCD connector (CN15) driving voltage by
setting JP4. The configuration is as follows:
LCD panel's voltage setting (JP4)
3.4 V 5 V
* default
LCD SHF/ASHF clock select (JP5)
You can select the LCD control signals by setting JP5. The
following charts show the available options.
LCD SHF/ASHF Clock select (JP5)
SHF CLK from C&T65550 ASHF CLK
* default
1 2 3
*
1 2 3
1 2 31 2 3
*