Specifications

Chapter 2 Installation 17
Clear CMOS Selection (JP1)
Safety precautions in setting up clear CMOS must be taken, always
place jumper on protect mode. In clearing CMOS, place jumper for
just a second (follow clear CMOS illustration) then, immediately
return jumper to protect mode.
* Protect Clear CMOS
1 2 3 1 2 3
* Default
LCD Panel Voltage Setting (JP6)
The LCD panel driving voltage is set by using JP6 jumper settings
illustrated as follows:
5V * 3.3V
1 2 3 1 2 3
* Default