Owner manual

3-20
IMBM-Q67A
3.7 Tools menu
TheToolsmenuitemsallowyoutocongureoptionsforspecialfunctions.Select
an item then press <Enter> to display the submenu.
3.7.1 EZ Flash 2 Utility
Allows you to run EZ Flash 2. Press [Enter] to launch the EZ Flash 2 screen.
3.7.2 SPD Information
DIMM Slot # [Slot 1]
Displays the Serial Presence Detect (SPD) information of the DIMM module
installedontheselectedslot.Congurationoptions:[Slot1][Slot2][Slot3][Slot4]
NOTES:
Slot 1: labeled DIMM_A1onthismotherboard;
Slot 2: labeled DIMM_A2onthismotherboard;
Slot 3: labeled DIMM_B1onthismotherboard;
Slot 4: labeled DIMM_B2 on this motherboard.
3.7.3 O.C.Prole
This item allows you to store or load multiple BIOS settings.
NOTE: The SetupProleStatusitems show Not Installed ifnoproleis
created.
SavetoProle
Allows you to save the current BIOS settings to the BIOS Flash, and create a
prole.Keyinaprolenumberfromonetoeight,press<Enter>,andthenselect
Yes.
LoadfromProle
Allows you to load the previous BIOS settings saved in the BIOS Flash. Key in the
prolenumberthatsavedyourCMOSsettings,press<Enter>,andthenselect
Yes.