Owner manual

Chapter 3: BIOS setup
3-5
To set an administrator password:
1. Select the Administrator Password item and press <Enter>.
2. From the Create New Password box, key in a password, then press
<Enter>.
3. Conrmthepasswordwhenprompted.
To change an administrator password:
1. Select the Administrator Password item and press <Enter>.
2. From the Enter Current Password box, key in the current password, then
press <Enter>.
3. From the Create New Password box, key in a new password, then press
<Enter>.
4. Conrmthepasswordwhenprompted.
To clear the administrator password, follow the same steps as in changing an
administratorpassword,butpress<Enter>whenpromptedtocreate/conrmthe
password. After you clear the password, the Administrator Password item on top
of the screen shows Not Installed.
User Password
If you have set a user password, you must enter the user password for accessing
the system. The User Password item on top of the screen shows the default Not
Installed. After you set a password, this item shows Installed.
To set a user password:
1. Select the User Password item and press <Enter>.
2. From the Create New Password box, key in a password, then press
<Enter>.
3. Conrmthepasswordwhenprompted.
To change a user password:
1. Select the User Password item and press <Enter>.
2. From the Enter Current Password box, key in the current password, then
press <Enter>.
3. From the Create New Password box, key in a new password, then press
<Enter>.
4. Conrmthepasswordwhenprompted.
To clear the user password, follow the same steps as in changing a user password,
butpress<Enter>whenpromptedtocreate/conrmthepassword.Afteryouclear
the password, the User Password item on top of the screen shows Not Installed.